Home > Products > Copper > Bronze Bushing > C95400 Aluminum Bronze Bushing


C95400(CuAl10Fe) Aluminum bronze is the most common cast aluminum bronze, C95400 is used in many heavy duty, high load and high wear applications. Good tensile strength, ductility, weldability and resistance to fatigue. Typical applications include worm gears, bushings, pump parts and bearings.
| General Specifications & Dimensions | ||
| Parameter | Specification / Range | Notes |
| Product Type | Sleeve Bearing, Plain Bearing, Bushing, Flanged Bearing, Thrust Washer | Common configurations based on application and mounting requirements. |
| Common Materials | SAE 841 (Powdered Metal), CuSn8, CuSn6, C86300, C93200, C95400, C63000, C90500 | SAE 841 is the most common sintered bronze grade; CuSn grades are standard for wrapped bearings |
| Bore (I.D.) Range | 0.3125 in – 1+ in | Stock sizes range from small fractional sizes; custom sizes available on request |
| Outside Diameter (O.D.) Range | 0.4385 in – 1.254+ in | O.D. tolerance is critical for proper press-fit into housing |
| Length Range | 0.5 in – 2.5 in+ | Standard lengths vary by I.D./O.D. combination; custom lengths available |
| Applicable Standards | ASTM, SAE 841, ISO 9001, IATF 16949 | Standards for material composition, dimensions, and quality management systems |
| Manufacturing Process | Sintered (Powdered Metal), Cast, Wrapped | Sintered bronze is oil-impregnated; cast bronze is used for heavy-duty applications |
| Dimensional Tolerances & Fit Recommendations | ||
| Parameter | Specification / Range | Notes |
| I.D. Tolerance (E7) | +0.020 to +0.061 mm (for sizes 5-30 mm) | Precision fits for shaft clearance; E7 is common for bronze bushings |
| O.D. Tolerance (r6) | +0.019 to +0.050 mm (for sizes 5-30 mm) | Standard interference fit for housing; ensures secure mounting |
| Recommended Shaft Fit | f8 or g6 | Standard fit for plain bearings; ensures proper clearance and lubrication |
| Recommended Housing Fit | H7 | Standard fit for bushing O.D.; ensures proper interference |
| Length Tolerance | ±0.005 in | Standard tolerance for bushing length |