Home > Products > Copper > Bronze Sheet/Plate > C95400 Aluminum Bronze Plate


C95400(CuAl10Fe) Aluminum bronze is the most common cast aluminum bronze, C95400 is used in many heavy duty, high load and high wear applications. Good tensile strength, ductility, weldability and resistance to fatigue. Typical applications include worm gears, bushings, pump parts and bearings.
| General Specifications & Dimensions | ||
| Parameter | Specification / Range | Notes |
| Common Alloys (UNS) | C22000 (Commercial Bronze), C65500 (High-Silicon Bronze), C95400 (Aluminum Bronze), SAE 841 (Oil-Impregnated Bronze) | Different alloys provide distinct mechanical properties and corrosion resistance |
| Thickness | 0.032 in – 0.5 in (0.8 mm – 12.7 mm) and up to 25 mm for certain alloys | Wide range from thin sheets to heavy plates |
| Width | Up to 48 in (1219 mm) | Standard widths vary by alloy and supplier |
| Length | Up to 120 in (3048 mm) | Custom lengths available upon request |
| Applicable Standards | ASTM B96, ASTM B248, ASTM B36/B36M, ASTM B438, SAE 841 | Standards govern chemical composition, mechanical properties, and dimensional tolerances |
| Manufacturing Process | Hot-Rolled, Cold-Rolled, Cast (Oil-Impregnated) | Process varies by alloy type and intended application |
| Form / Shape | Plate, Sheet, Coil | Available in multiple forms for different fabrication needs |
| Alloy Designations & Applicable Standards | |||
| Alloy Name | UNS Number | Common Standards | Key Applications |
| Commercial Bronze | C22000 | ASTM B36/B36M | Medals, jewelry, hardware, lighting fixtures, kickplates, weather stripping |
| High-Silicon Bronze | C65500 | ASTM B96, ASTM B248 | Marine hardware, fasteners, bushings, shafts; EPA-registered antimicrobial |
| Aluminum Bronze | C95400 | Cast Alloy Standards | High-strength, corrosion-resistant applications; bearings, gears, pump components |
| Oil-Impregnated Bronze (Oilite) | SAE 841 | ASTM B438, SAE 841 | Self-lubricating bearings and wear parts; cast for porosity |
| Mechanical Properties (By Alloy & Temper) | |||
| Alloy (UNS) | Temper | Tensile Strength (ksi) | Yield Strength (ksi) |
| C22000 | Annealed | 29–39 (200–270 MPa) | 9–15 (60–100 MPa) |
| C22000 | H02 (Cold Worked) | 44–54 (300–370 MPa) | 36–44 (250–300 MPa) |
| C22000 | H04 (Cold Worked) | 55–65 (380–450 MPa) | 49–58 (340–400 MPa) |
| C65500 | Standard | 55 | 22 |
| C95400 | As Cast | 75 (515 MPa) | 30 (205 MPa) |
| C95400 | TQ50 Temper | 90 (620 MPa) | 45 (310 MPa) |
| SAE 841 | Cast | 14 (96 MPa) | 11 (76 MPa) |