Products

Home > Products > Copper > Copper Pipe/Tube > C11000 Cu-ETP Copper Tube

C11000 Cu-ETP Copper Tube


C11000 has excellent corrosion resistance to weathering and very good resistance to many chemicals. It is often used specifically for corrosion resistance. It is suitable for use with most waters, and can be used underground because it resists soil corrosion. It resists non-oxidising mineral and organic acids, caustic solutions and saline solutions.




Description

General Specifications & Dimensions
Parameter Specification / Range Notes
Common Alloys (UNS) C10200 (Oxygen-Free), C12000 (DLP), C12200 (DHP) C12200 (DHP) is the most common general-purpose grade for plumbing and HVAC applications
Common Grades (JIS) C1100, C1220 Japanese Industrial Standard equivalents
Outside Diameter (OD) Range 3.2 mm – 219 mm (1/8" – 8.6") Wide range from small instrumentation tubing to large pipes
Wall Thickness Range 0.3 mm – 5.5 mm Varies by standard and application; ACR tubes have specific wall thicknesses per size
Length 3 m – 12 m (straight); 15 m – 100 m (coils) Standard mill lengths; custom lengths available
Product Forms Straight Lengths, Pancake Coils Coils are typically annealed (soft) for flexibility; straight lengths may be drawn (hard) or annealed
Applicable Standards ASTM B88, ASTM B75, ASTM B280, JIS H3300, EN 1057, AS1432 Standards for plumbing, ACR, and general engineering applications
Temper / Hardness Designation Annealed (Soft/O60/R220), Drawn (Hard/H58/H80/R250), Half-Hard Temper significantly impacts mechanical properties and formability
Manufacturing Process Seamless, Cold-Drawn Seamless construction ensures uniform properties and pressure integrity
Alloy Designations & Standards Cross-Reference
UNS No. Description ASTM Standard JIS Grade EN 1057
C10200 Oxygen-Free (OF) without residual deoxidants ASTM B88, B75, B280 C1020 Cu-OF
C12000 Phosphorus Deoxidized, Low Residual Phosphorus (DLP) ASTM B88, B75, B280 / Cu-DLP
C12200 Phosphorus Deoxidized, High Residual Phosphorus (DHP) ASTM B88, B75, B280 C1220 Cu-DHP
Mechanical Properties (By Temper)
Alloy / Grade Temper Tensile Strength (MPa, min) Elongation (%) min Hardness (HV)
C12200 (DHP) R220 (Soft/Annealed) ≥ 220 ≥ 40 40 – 70
C12200 (DHP) R250 (Drawn/Half-Hard) ≥ 250 ≥ 30 75 – 100
C12200 (DHP) R290 (Hard) ≥ 290 ≥ 3 ≥ 100
C12200 (H58) Drawn General Purpose ≥ 250 / /
C12200 (H80) Hard Drawn ≥ 310 / /

Inquiry Us
  • Submit Reset

Back to list